Project Description

Rotary Vane Two Stage Electric Coating Vacuum Pump

  • The 2XZ series rotary vane vacuum pump belongs to two stage direct connection structure rotary vane vacuum pump, which can be used for drying, sealing the container and other ancillary pumping air or net vacuum equipments.
  • It has the advantages of small size, light weight, low noise, convenient for using and more.
  • The 2XZ series rotary vane vacuum pump can not be used as the compression type delivery pump
Contact Now

2XZ-series industrial grade dual-stage vacuum pumps are designed for reliable long time continuous operation. They have a balance between low cost and high performance.

They come with gas ballast, which is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. The built-in check valve prevents pump oil backflow.

We offer all necessary fittings (KF25 clamps and hose barb connectors, etc) and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run.

It is important to note that pumps should always be ran in a well ventilated area.

 

Features

  •  it can be a separate role, can also be used as various types of high-vacuum system of the pre-pump and pre-pump.
  • the inlet continuous open air operation, shall not exceed three minutes.
  • the pump does not apply to the extraction of metal corrosive, the chemical reaction of the oil from the pump, containing dust particles of gas to the body oxygen is too high, there is explosive gas.
  • the pump has to be used for compression pump or pump.
  • working environment: temperature 5 ℃ -40 ℃ range, the relative temperature is not greater than 90%, inlet pressure less than 1333Pa under the conditions allow long-term continuous operation.
  • the installation of the power supply, according to the provisions of the motor tag wiring, motor rotation should be noted that the direction of the arrow on the bearing the same direction.
  • continuous pumping container pipe, the diameter should not be less than the pump inlet diameter, and the pipe should be short and less elbow, while paying attention to pipeline leakage.
  • before each start focusing on the oil level to stop the pump oil to the oil standard glass diameter of 4/5 height is appropriate.

Detail images

Specific Parameters

Model 2XZ-0.5 2XZ-1 2XZ-2 2XZ-4 2XZ-8 2XZ-15
Pumping speed (L/S) 0.5 1 2 4 8 15
Ult. vacuum (Pa) Without gas ballast ≤6*10-2
With gas ballast ≤6.5 ≤1.33
Rotary speed (r/min) 1400 1410 1410
Working Voltage (V) 220 220/380
Motor power (Kw) 0.18 0.25 0.37 0.55 1.1 1.5
Inlet diameter (mm) Φ16 Φ16 Φ25 Φ25 Φ40 Φ40
Temp. rise of pump oil (℃) 40 ≥45 ≥65 ≥70
Oil capacity (L) 0.5 0.55 0.8 0.1 2.5 4.0
Size L (mm) 445 467 488 528 575 703
W (mm) 130 130 145 145 172 338
H (mm) 254 254 280 280 350 453
Weight (kg) (with 3-phase motor) 13.5 15 20 23 48.5 77.5
Noise (db) ≥60
Vibration reference number (u) ≥80

Factory display

Our Factory

Packaging

Our Service

Pre-sale Service

  1. Provide 24-hour technical consulting reply;
  2. Provide professional quoted price;
  3. Provide detailed product performance specification;
  4. According to product’s using condition, technicians will offer rationalization proposals to assist clients to select proper product types;
  5. Provide other corollary equipment according to client requirements.

In-sale Service

  1. Begin to supervise from raw material, its qualified rate can reach to 100%;
  2. Whole manufacturing process are in strict accordance with promised procedure requirements, product qualified rate can reach to 100%;
  3. Provide product’s inspection record of key junctures to customers;
  4. Provide production schedule photos to customers at regular intervals;
  5. Package and transport products strictly accordance with export standard;
  6. Provide transportation schedule information to clients timely.

After-sale Service

  1. Provide targeted installation video;
  2. Under the premise of correct installation, normal maintenance and using, we guarantee one-year warranty period;
  3. When warranty period has expired, our sold products enjoys lifetime guarantee repair, we only charge cost price for changing product’s standard component and sealing component;
  4. During installation and adjustment period, our after-sale service staff will communicate with customers frequently to know product’s running state in time. Assist customers to install and adjust products until customers are satisfied;
  5. If product has malfunction during operation period, we’ll offer you satisfied answer in time. We’ll reply you within 1 hour and provide solution or send staff to spot within 24 hours after receiving maintenance notification.
  6. Lifelong free technical support. Conduct satisfaction survey and inquiry equipment running condition to clients by telephone or e-mail semiannually from the first day of equipment running, put on records of acquired information;
  7. Provide assistant service if product is damaged during transportation.

Get In Touch With Us