Project Description
High-and-Low-Temperature-Circulating-Device
High and Low-Temperature Water Bath Circulating Device is two-machine integrated equipment, low-temperature cooling liquid circulating pump and high-temperature oil bath pot of dual functions. It is widely applicable in tertiary institutions, environmental protection, biochemical, medical, chemical, scientific research and other fields. The product has the characteristics of the reasonable structure, simple operation, good stable performance, and moderate price.
The whole system is a closed liquid circulation system with the expansion of container, expansion of the container and the liquid circulation is adiabatic and did not participate in liquid circulation, only mechanical connection, regardless of the temperature of liquid circulation is a high temperature or low-temperature expansion of the medium container of low at 60 degrees.
Throughout the liquid circulation system is sealed, the low temperature did not absorb water vapor, high temperature did not produce the oil miss The entire circulatory system is not used in machinery and electronic valves.
Main Features
1.Using American Valley Wheel Emerson, France hundred years Taikang, Germany Danfus and other brands of imported compressors.
2.The whole liquid circulation is a fully enclosed system. The thermal conductive fluid is not volatile and oxidized at high temperature. It is not easy to absorb the moisture in the air at low temperature, extend the service life of the heat transfer fluid, and the oil change is not required during heating and cooling.
3.Plate heat exchanger is used in refrigeration and heat exchanger, which has high heat transfer coefficient, large heat transfer area per unit volume, small heat loss and 35% higher heat transfer ratio than that of coil tube.
4.Liquid level display function, monitor liquid level at any time, avoid lack of liquid.
5.Digital explicit temperature control, PID temperature control technology, overtemperature power cut-off and dry burning protection function is simple to operate.
6.The temperature probe is PT100 sensor.
Product display
Details Image
Specific Parameters
| Model | GDX-10/40 | GDX-20/40 | GDX-30/40 | GDX-50/40 | GDX-100/40 | |
| Circulation Type | Closed Circulation | |||||
| Performation | Temperature Setting Range(℃) | -40~200 | ||||
| Cooling Capacity（KW） | 0.45~2.5 | 0.45~3.5 | 0.45~3.5 | 0.9~5.5 | 0.2~10 | |
| Max Lift(M) | 6 | 6 | 6 | 12 | 12 | |
| Max Flow(L/min) | 20 | 20 | 20 | 30 | 30 | |
| Function | Temperature Control | 30 sectionsgradient control(standard type),intelligent PID,SSR contactless zero | ||||
| Safety Function | passage output,self-diagnostic function,user authority management,emergency stop(standard type),leakage overloadprotector,compressor protector,high pressure switch,compressor delay protection,temperature overrun protection | |||||
| External Input | External sensor port,USB date interface(standard tyre). | |||||
| Structure | Heater(KW) | 3 | 3 | 3 | 5 | 9 |
| Refrigerant | R404A | |||||
| Temperature Sensor | PT100 | |||||
| Specification | External Loop Interface | DN15 PN10 | DN20 PN10 | |||
| Dimension(MM) | 670*600*1030 | 670*600*1030 | 670*600*1030 | 750*720*1180 | 1130*830*1450 | |
| Power Supply | Single Phase 220V/50HZ | Three Phase 380V/50HZ | ||||
| Shell Material | SUS304 Stainless Steel,Cold rolled steel | |||||
Factory display
Our Factory
Packaging
Our Service
Pre-sale Service
- Provide 24-hour technical consulting reply;
- Provide professional quoted price;
- Provide detailed product performance specification;
- According to product’s using condition, technicians will offer rationalization proposals to assist clients to select proper product types;
- Provide other corollary equipment according to client requirements.
In-sale Service
- Begin to supervise from raw material, its qualified rate can reach to 100%;
- Whole manufacturing process are in strict accordance with promised procedure requirements, product qualified rate can reach to 100%;
- Provide product’s inspection record of key junctures to customers;
- Provide production schedule photos to customers at regular intervals;
- Package and transport products strictly accordance with export standard;
- Provide transportation schedule information to clients timely.
After-sale Service
- Provide targeted installation video;
- Under the premise of correct installation, normal maintenance and using, we guarantee one-year warranty period;
- When warranty period has expired, our sold products enjoys lifetime guarantee repair, we only charge cost price for changing product’s standard component and sealing component;
- During installation and adjustment period, our after-sale service staff will communicate with customers frequently to know product’s running state in time. Assist customers to install and adjust products until customers are satisfied;
- If product has malfunction during operation period, we’ll offer you satisfied answer in time. We’ll reply you within 1 hour and provide solution or send staff to spot within 24 hours after receiving maintenance notification.
- Lifelong free technical support. Conduct satisfaction survey and inquiry equipment running condition to clients by telephone or e-mail semiannually from the first day of equipment running, put on records of acquired information;
- Provide assistant service if product is damaged during transportation.
Get In Touch With Us
