As a matter of fact, the glass reactor has wide applications in our daily lives. For example, it is more used in some chemical researches. However, this product is relatively strange for most people. Meanwhile, the type of reactors is not single. In fact, it may include many different types such as high pressure reactor, glass lined reactor, chemical reactor, etc.

The high borosilicate glass is a new reactor material. Meanwhile, it is provided with the chemical properties of the experimental equipment. And this product is an unique equipment of stainless steel frame structure. Even some reactors are ideal, beautiful and practical, and they are easily cleaned.

Usage of glass reactor

Actually, our knowing reactor is mainly used for chemical experiments and researches. For example, the laminated glass reaction kettle can pass into the cold cycle different liquid in a sealed glass container. Generally, the reaction may be carried out at atmospheric pressure or negative pressure. Moreover, the reaction process is usually transparent at a glance. And it is ideal equipment or new material in the modern bio pharmaceutical, fine chemical or test.

The Attributes of glass reactor

1.Jacketed vessel is with material high borosilicate glass, can reach to max temperature 300degree, min temperature -80degree(tested by technician), but we need to clarify that we only suggest to use max temperature 250degree, because of it has PTFE valve and PTFE sealing,etc.

2.Bottom Discharging valve: it has two kinds respective for side discharging and non- side discharging valve(straight down discharging), the side discharging valve is easy to connect with other afiliated equipment(for example:the another reactor with same function, or getting samples easily,etc); as for non-side discharging valve, it is with same function with side discharging valve, and with 100% PTFE material

3.Jacketed Vessel, the inner wall is 6mm,the outer wall is 8mm. The active pressure is with 0.2Mpa(about 2KGS),the negative pressure is with -0.098Mpa, the inner wall was connected with outer wall by high temperature,no faulty, no blowhole(our technician needs to do test experiment excluding faulty).

4.Reactor lid, it has standard 5 necks: the middle is the stirring port with flange,the stirring sealing is PTFE sleeve with bearing, and with a mechanical spring tapersleeve, it can be kept in good sealing condition when it is doing stirring reaction. The left is the dropping funnel,the right is condenser(optional: glass bend with collecting flask 0.25L or 500ml), the rear is multi-function port(air inlet or charging function or outgassing or vaccum supplying).the front is the temperature port with glass thermowell. According to customer request, still we can add a big charging port with 50mm(PTFE cover keeps seal).

5.The motor is no brush,and no spark,low noise,adjustable speed of frequency convertor (optional:ex-proof motor).And the controller has speed and temperature’s display.

Related Products